BERGHOF Automation Annex
2VF100055FE02.doc DC1000_HB_en_2D0982003ZD00.doc 85
7. Annex
7.1. Environmental Protection
7.1.1. Emission
When used correctly, our modules do not produce any harmful emissions.
7.1.2. Disposal
At the end of their service life, modules may be returned to the manufacturer
against payment of an all-inclusive charge to cover costs. The manufacturer
will then arrange for the modules to be recycled.
7.2. Maintenance/Upkeep
Do not insert, apply, detach or touch connections while in operation – risk
of destruction or malfunction.
Disconnect all incoming power supplies before working on our modules; this also
applies to connected peripheral equipment such as externally powered sensors,
programming devices, etc. All ventilation openings must always be kept free of
any obstruction.
The modules are maintenance-free when used correctly.
Clean only with a dry, non-fluffing cloth.
Do not use detergents.
7.3. Repairs/Service
Repair work may only be carried out by the manufacturer or its authorised service
engineers.
7.3.1. Warranty
Sold under statutory warranty conditions. Warranty lapses in the event of unauthor-
ised attempts to repair the equipment and/or product, or in the event of any other
form of intervention.
To Next Page
Loading...
