122
Troubleshooting
General Messages
General Messages Explanation Repair
Winding the bobbin Wind bobbin as shown in the animations
1x
The sewing computer requires cleaning/lubrication. To ensure that the sewing computer can operate at highest
performance further on, it is time to remove lint and any
thread and fabric remnants from under the stitch plate and
around the feed-dog.
This message appears after approx. 500,000 stitches.
Close the message after cleaning/lubricating by touching the
field. The message can be deleted temporarily by
touching the field but will reappear when the sewing
computer is next restarted. After the third deletion with the
message will not reappear before another approx. 500,000
stitches will have been stitched.
After oiling bring the hook in the pictured position (see on the
left) by turning the handwheel clockwise for correct threading.
To Next Page
Loading...
