BIFFI ICON3000 - Device Variable 14: 2 SP - Close Start Position; Device Variable 15: 2 SP - Close Stop Position; Device Variable 16: 2 SP - Close ON Time; Device Variable 17: 2 SP - Close OFF Time

Installation, Operation and Maintenance Manual
MDE 254 Rev. 1 March 2021
Device Variables 53
Section 9: Device Variables
9.18 Device Variable 15: 2SP – Close Direction
Stop Position
This variable indicates the position where the timer function stop during a stroke in closing.
9.19 Device Variable 16: 2SP – Close Direction
ON Time
This variable indicates the ON time of motor in 2 Speed Timer operation in close direction.
9.20 Device Variable 17: 2SP – Close Direction
OFF Time
This variable indicates the OFF time of motor in 2 Speed Timer operation in close direction.
9.21 Device Variable 18: 2SP – Open Direction Status
This variable indicates the status of the timer function in opening direction. This in an enumerated
variable, the possible values are:
Table 144.
Value Description
0 Off
1 On
9.22 Device Variable 19: 2SP – Open Direction
Start Position
This variable indicates the position where the timer function start during a stroke in opening.
9.23 Device Variable 20: 2SP – Open Direction
Stop Position
This variable indicates the position where the timer function stop during a stroke in opening.