To Next Page

To Previous Page

Installation, Operation and Maintenance Manual

MDE 254 Rev. 1 March 2021

Device Variables 55

Section 9: Device Variables

9.30 Device Variable 27: Power Supply Voltage

This variable indicates the actuator power supply voltage. It’s not possible to write this variable.

9.31 Device Variable 28: Power Supply Frequency

This variable indicates the actuator power supply frequency. It’s not possible to write this variable.

9.32 Device Variable 244: Percent Range

This variable indicates the percentage corresponding to the Loop Current signal. It’s not possible to

write this variable.

9.33 Device Variable 245: Loop Current

This variable indicates the value of the analog input current. It’s not possible to write this variable.

9.34 Device Variable 246: Primary Variable

This variable indicates the percentage corresponding to the Loop Current Signal. It’s not possible to

write this variable.

9.35 Device Variable 247: Secondary Variable

This variable indicates current position of the actuator. It’s not possible to write this variable.

9.36 Device Variable 248: Tertiary Variable

This variable indicates the current torque measured by the actuator. It’s not possible to write this variable.

9.37 Device Variable 249: Quaternary Variable

This variable indicates the internal temperature of the actuator. It’s not possible to write this variable.

BIFFI ICON3000 User Manual

Other manuals for BIFFI ICON3000