KB (E4 + E6) 02/2017 page 131/148
23.5 Equipment and Options (extract)
To operate the cooling incubator, use only original BINDER accessories or accessories / com-
ponents from third-party suppliers authorized by BINDER. The user is responsible for any risk
arising from using unauthorized accessories.
size
Multifunction program controller T4.12 with digital display
Overtemperature safety controller class 3.1 acc. to DIN 12880:2007
DCT™ refrigerating system with refrigerant R134a
Four castors (2 lockable)
Access port 30 mm left, with silicone plug
Additional shelf, stainless steel
Perforated shelf ,stainless steel
Reinforced rack stainless steel with 1 set of rack lockings (max. load 70
kg / 154.3 lb)
--
Reinforced rack (max. load 67 kg / 147.7 lb) with additional fixation for
operating shakers, stirrers, roller systems
Additional access ports 10 mm /
0.39 in / 30 mm / 1.18 in / 50 mm / 1.97
in or 100 mm / 3.94 in mm with silicone plug
-- -- --
Additional access ports 30 mm / 1.18 in, 50 mm / 1.97 in or 100 mm / 3.94
in, with silicone plug
-- --
Rubber pads for safe stacking (4 pieces)
RS422 communication interface
-voltage relay alarm output with DIN socket (6 poles), DIN plug in-
Zero-voltage relay control outputs via operation lines output to DIN socket
(6 poles), DIN plug included (may be available by BINDER INDIVIDUAL
Customized Solutions)
Water-proof interior socket 100-240 V AC IP 67 (plug IP 67)
Object temperature display with flexible Pt 100 temperature sensor
Analog output for temperature 4-20mA, not adjustable, with DIN socket (6
poles), DIN plug included
Over- and undertemperature safety controller class 3.3 acc. to DIN
12880:2007
Interior lighting (KB 53 / 115 / 240: 15 W; KB 400 / 720: 30 W)
Factory calibration certificate
Spatial temperature measurement with certificate
Stable table on wheels with castors and locking brakes