Binder KB 720 (E6) - Alarm Configuration

KB (E4 + E6) 02/2017 page 96/148
14.5 Alarm configuration and overview
To access the alarm lists and configuration menu, go to Menu > Alarms
Fixed value
08.03.2015 05:05:06
Submenu “Alarm”.
Select the desired function
and press the operating button.
..\ Alarm
Active alarms
History
Buzzer test
Buzzer On/Off
Alarms On/Off
Close Home
Active Alarms List of the active alarms (status “set” or “acknowledged”).
History List of all alarms (status “set” or “acknowledged” or “cleared”).
Buzzer test Testing the alarm buzzer, chap. 14.5.3
Buzzer On/Off Activating / deactivating the alarm buzzer, chap. 14.5.3
Alarms On/Off
Activating / deactivating the alarm functions. Off: Alarm buzzer off, no alarm
icons displayed. No alarm messages will be displayed.
14.5.1 List of active alarms
To access the overview list of active alarms, go to Menu > Alarms > Active alarms
Fixed value
08.03.2015 05:05:06
Submenu “Active alarms“.
All active alarms with status “set”
or “acknowledged”,
are listed.
..\ Active alarms
Safety controller overtemperature
Close Home
If no alarm is active (“set” or “acknowledged”), no message will be displayed in this window.