Binder KB 720 (E6) - Word Message Panel Structure; Localization; Position of Safety Labels on the Chamber

KB (E4 + E6) 02/2017 page 8/148
Prohibition signs
Do NOT touch
Do NOT spray with
water
Do NOT climb
Information to be observed in order to ensure optimum function of the product.
1.2.4 Word message panel structure
Type / cause of hazard.
Possible consequences.
∅ Instruction how to avoid the hazard: prohibition
 Instruction how to avoid the hazard: mandatory action
Observe all other notes and information not necessarily emphasized in the same way, in order to avoid
disruptions that could result in direct or indirect injury or property damage.
1.3 Localization / position of safety labels on the chamber
The following labels are located on the chamber:
Pictograms (Warning signs)
Hot surface
• Inner glass door above the glass door
handle
Read operating manual
• UL chambers: outer chamber door
• KB with optional interior socket: below
the interior socket
Service label
Figure 1: Position of labels on the chamber (example KB 240-UL)
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER Service for these replacements.