Biolight Meditech M800 - Appendix C Factory Defaults; Alarm Setup; System Setup

Handheld monitor user’s manual
20
Appendix C Factory Defaults
This section lists the most important factory default
settings. These settings can be adjusted and you can load the
factory defaults if you need.
C.1 Alarm Setup
Alarm Setup
Factory Default
Alarm Vol
2
SpO
2
Alarm Level
Med
PR Alarm Level
Med
HR Alarm Level
Med
C.2 System Setup
System Setup
Factory Default
Beep Vol
2
Key Vol
2
Brightness
3
Scan Speed
25mm/s