Biolight Meditech M800 - Alarm Tone Configuration; Setting the Minimum Alarm Volume; Pausing the Alarm Tones

Handheld monitor user’s manual
Chapter 4-7
4.5 Alarm Tone Configuration
4.5.1 Setting the minimum Alarm Volume
1. Select
【
Menu
】→【
System
】→【
Maintenance
】→
enter the required password.
2. Select
【
Min.Alm.Vol.
】
and then select a value between
0 and 4.
4.5.2 Changing the Alarm Volume
1. Select【Menu】→【General Setup】.
2. Select【Alarm Vol.】and then select a value between X
and 4. X is the minimum volume which depends on the
setting of the minimum alarm volume.
4.6 Pausing the Alarm Tones
Press the alarm pause button to keep the alarm
paused for 120 seconds. And there will be alarm paused
symbol and paused time shown in the alarm status.
 The audible alarm is paused, but the alarm lamp
remains lit and the alarm message remains
displayed;
 The remaining alarm pause time is displayed in the
alarm status area;