Handheld monitor user’s manual
6
A.5.5 Sensors
Pulse oximetry sensors contain LEDs that emit red
light at a wavelength of approximately 660 nm and
infrared light at a wavelength of approximately 905
nm.
The total optical output power of the sensor LEDs
is less than 15 mW.
This information may be useful to clinicians, such
as those performing photodynamic therapy.
A.6 Data Storage
The changing trends of SpO
2
and PR data will be shown in
the monitor:
Spot-check: ID from 1 to 99, 300 groups (200
groups with wifi) can be stored for each ID.
Continuous: ID is 0, 60000 groups (20000 groups
with wifi) can be stored.