Handheld monitor user’s manual
Chapter 3-2
3.2 Getting Started
1. Before you start to make measurements, carry out the
following checks on the monitor including all connected
modules.
——Check for any mechanical damage;
——Check for any incorrect connection of all the external
cables and accessories.
2. Put batteries into the battery compartment. Make sure
that the battery has sufficient power for monitoring.
When you use a lithium battery for the first time, you
must charge it, following the instructions given in
Battery chapter.
Warning:
Warning: If the monitor is mechanically damaged,
or if it is not working properly, do not use it for any
monitoring procedure on a patient. Contact your
service personnel.
To avoid explosion hazard, do not use the monitor
in the presence of flammable anesthetics, vapors or
liquids.
To Next Page
Loading...