Biolight Meditech M800 - Wifi Maintenance; Selecting Wifi

Handheld monitor user’s manual
Chapter 3-10
Maintenance】, set【DspSwitch】to【On】or【Off】. If
you select【On】, the screen can react to the gravity. When
the monitor rotates, the screen will rotates the display
direction automatically.
3.12 Wifi Maintenance
Select【Menu】→【System】→【Maintenance】,enter
the required password. Select【Factory Setup】,then select
【
Wifi Maintenance
】
to set the SSID, Mac No., IP address.
The default number of SSID is“bltcnswif1”.The Mac No. is
the same with the bedside unit’s number displays by central
software. The default gateway is 50. After setting, you
should restart the monitor. When you want to use the Wifi,
you should set the Wifi routers according to the Central
Monitoring System Installation Instruction, otherwise, it will
be disconnected.
3.13 Selecting Wifi
Select【Menu】→【System】, set【Wifi】to【On】
or
【
Off
】
. If you select
【
on
】
, the device will connect the