Handheld monitor user’s manual
Chapter 9-5
especially careful to keep water out of all kinds of cable
and outlet on the panel.
4. Do not use abrasive material including wire brush or
metal brightener during cleaning because this material
will damage the panel and monitor screen.
5. Do not submerge the monitor in liquid.
6. While cable or plug of attachment accidentally gets wet,
please rinse it with distilled water or deionized water and
dry it in the environment of temperature 40℃ to 80℃ for
at least one hour.
9.4 Cleaning SpO
2
Sensor
1. The casing of the sensor and light tube can be cleaned
with swab or non-velvet soft cloth dipped with medical
alcohol.
2. The sensor cable can be cleaned or sterilized with
Hydrogen Peroxide 3% or isopropyl alcohol 70%.
3. It is forbidden to put the monitor in high-pressure
containers and put the sensor directly in liquid.
To Next Page
Loading...