Handheld monitor user’s manual
Chapter 9-6
Warning: Do not reuse or disinfect the disposable
SpO
2
sensor.
9.5 Cleaning ECG Cable
The recommended disinfectors include glutaric
dialdehyde solution and 10% decolourant solution.
a) Please clean cable prior to sterilization.
b) Clean the cable surface with soft cloth bedewed with
some fresh water or neutral soapy water.
c) Scrub cable with soft cloth bedewed with some
disinfector.
d) Wipe off the disinfector remaining on cable by soft
cloth bedewed with fresh water.
e) Put cable in a shady and cool environment for airing.
Attention:
Do not sterilize lead wire with high-pressure,
radioactive or steam device.
Do not directly submerge lead wire in liquid.
To Next Page
Loading...