Biolight Meditech M800 - Restoring the Factory Configuration; Shutting off the Monitor

Handheld monitor user’s manual
Chapter 3-11
router automatically. The symbol will display on the
upper right of the screen after connecting successfully. The
display icon may change according to the intensity of signal.
3.14 Restoring the Factory Configuration
If you have changed the system’s configuration and want
to restore the factory configuration, follow this procedure:
1. Select【Menu】→【System】.
2. Select
【
Load Default Conf.
】
, popping up a
confirming window, select 【OK 】to restore the
factory configuration.
3.15 Shutting off the Monitor
Please follow the below steps to shut off the monitor:
1. Confirm that the patient monitoring is finished.
2. Disconnect the SpO
2
sensors form the monitor.
3. Press the power button and hold it for 2s to turn
off the monitor.