Biolight Meditech M800 - Appendix D Alarm Message; Physiological Alarm

Handheld monitor user’s manual
22
Appendix D Alarm Message
This section lists some important alarm message. In the
tables below, “*” means the alarm level is user-adjustable.
D.1 Physiological alarm
Messages
Cause
Level
SpO
2
Too High*
A measurement has risen
above the high alarm limit or
fallen below the low alarm
limit.
Medium
SpO
2
Too Low*
SpO
2
Desat
SpO
2
measurement has fallen
below the SpO
2
desat limit.
High
PR Too High*
A measurement has risen
above the high alarm limit or
fallen below the low alarm
limit.
Medium
PR Too Low*
HR Too High*
HR Too Low*
No Pulse
The pulse signal was too
weak to be analyzed.
High
Asystole
No QRS is detected for 4
consecutive seconds.