Handheld monitor user’s manual
Chapter 3-8
Caution: Only when the monitor isn’t monitoring
any patient, connecting its SpO2 sensor or ECG
electrode to a patient, the patient ID will add 1
automatically.
3.7 Selecting Patient Type
To select the patient type,
1. Select【Menu】→【System】→【Type】.
2. Set【Type】to【Adu】,【Ped】or【Neo】.
3.8 Entering/Exiting the Demo Mode
To enter the demo mode:
1. Select【Menu】→【System】→【Maintenance】
→enter the required password.
2. Set【Screen】to【Demo】and the message【Demo
Mode】is shown in the technical alarm area.
To exit the demo mode:
1. Select【Menu】→【System】→【Maintenance】
→enter the required password.
2. Set【Screen】to【Normal】.
To Next Page
Loading...