Handheld monitor user’s manual
Chapter 1-8
2. Patient ID No.: When 【Continuous】 is selected for
work mode, the value is 0 at all times; when
【
Spot-Check
】
is selected, the value is between 1 and
99.
3. HR/PR parameter area: HR/PR parameter and its high
and low alarm limits are shown in the area.
4. Physiological alarm area: Current physiological alarm
information is shown in the area.
5. SpO
2
parameter area: Current SpO
2
value and its high
and low alarm limits are shown in the area.
6. Technical alarm and prompt information area: Current
technical alarm and prompt information are shown in
the area.
7. Alarm status area: Alarm status symbols and alarm
pause time are shown in the area.
8. Pleth bar: Pulse intensity is denoted by the quantity of
blocks.
9. System time: Current time is shown in the area.
10. Shift: After startup, 【Shift】shown here is functions of
the right button. At the time, press the right button to
shift between different display modes.
To Next Page
Loading...