Handheld monitor user’s manual
Chapter 5-3
Warning:
Check the SpO
2
sensor and its package for any sign
of damage before use. Do not use the sensor if any
damage is detected.
When disposing the disposable SpO
2
probe or
useless SpO
2
probe, please observe all local, state,
and federal regulations that relate to the disposal of
this products or similar products.
Caution: In case it is necessary to add a clip to fix
the fingertip sensor, the cable instead of the sensor
itself should be clipped. Please note that the cable of
sensor should not be pulled with force.
Note:
The pleth wave is not equal to the intensity of PR
signal.
The monitor does not provide automatic
self-examination alarm signal and the operator has
to use SpO
2
simulator for self-examination.
To Next Page
Loading...