O-19 Rev F
operatIon
O-19
Qc Sample lot numBer (l/n)
To retrieve results based on the lot number of the QC Sample used:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the
keys.
3. Press the key.
4. Select Qc reSultS using the
keys.
5. Press the key.
6. Select Qc Sample reSultS using the
keys.
7. Press the key.
8. Select panel type using the
keys.
9. Use the keys to select the desired panel.
10. Select Qc Sample l/n using the keys.
11. Type in the QC Sample lot number of the test device. To correct, press to
clear the entire number. Then type in the correct number.
12. Press the key.
13. All results from test run on the requested QC Sample lot number for the selected
panel are displayed.
14. Use the keys to view the entire record.
15. Press the key to make a printed copy.
16. Press the key to upload the selected results to LIS.
maIn menu
recall reSultS
Qc reSultS
Qc Sample reSultS
Note: To
display all
results for the
selected panel, leave
teh QC Sample L/N
blank.
To Next Page
Loading...
