EasyManuals Logo

Biotek Epoch User Manual

Biotek Epoch
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
viii | Preface
Intended Use Statement
The Epoch is a single-channel, automated, benchtop, general-purpose microplate
monochromator that performs optical density measurements of samples in a
microplate format. The user must evaluate this instrument with PC-based
software in conjunction with the specific assay. This evaluation must include the
confirmation that performance characteristics for the specific assay are met.
This system is designed for use with PC-based software only. BioTek Gen5
software will provide the user with instrument control and data reduction.
The intended use of this instrument is dependent on the instrument’s labeling. If
there is an IVD label, then the instrument may be used for clinical, research and
development, or other nonclinical purposes. If there is no such label, then the
instrument may only be used for research and development, or for other
nonclinical purposes.
Quality Control
It is considered good laboratory practice to run laboratory samples according to
instructions and specific recommendations included in the package insert or standard
laboratory protocol for the test to be conducted. Failure to conduct Quality Control
checks could result in erroneous test data.
Warranty and Product Registration
Please take a moment to review the warranty information that shipped with your product.
Please also register your product with BioTek to ensure that you receive important
information and updates about the product(s) you have purchased.
You can register online through the Customer Resource Center (CRC) at www.biotek.com
or by calling 888/451-5171 or 802/655-4740.
Warnings
Operate the instrument on a level surface away from excessive humidity.
Bright sunlight or strong incandescent light can reduce the linear
performance range of the instrument.
Measurement values may be affected by extraneous particles (such as
dust) in the microplate wells. A clean work area is necessary to ensure
accurate readings.
When operated in a safe environment according to the instructions in
BioTek
®
Instruments, Inc.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Biotek Epoch and is the answer not in the manual?

Biotek Epoch Specifications

General IconGeneral
TypeMicroplate Spectrophotometer
Wavelength Range200 - 999 nm
Light SourceXenon flash lamp
Power Requirements100 - 240 VAC, 50/60 Hz
Wavelength Repeatability+/- 0.2 nm
Absorbance Range0-4.0 OD
Plate Types6- to 384-well microplates
ShakingLinear, orbital
Detection ModesAbsorbance
SoftwareGen5
Bandwidth5 nm
ConnectivityUSB

Related product manuals