Need help?Do you have a question about the Biotek Epoch and is the answer not in the manual?
General| Type | Microplate Spectrophotometer |
|---|---|
| Wavelength Range | 200 - 999 nm |
| Light Source | Xenon flash lamp |
| Power Requirements | 100 - 240 VAC, 50/60 Hz |
| Wavelength Repeatability | +/- 0.2 nm |
| Absorbance Range | 0-4.0 OD |
| Plate Types | 6- to 384-well microplates |
| Shaking | Linear, orbital |
| Detection Modes | Absorbance |
| Software | Gen5 |
| Bandwidth | 5 nm |
| Connectivity | USB |
Details the features and capabilities of the Epoch monochromator, including its wavelength selection and control software.
Steps for safely unpacking and inspecting the Epoch instrument for any signs of damage upon arrival.
Explains how to use the Gen5 software to control the Epoch microplate reader.
Provides basic instructions for configuring the Gen5 software to work with the Epoch instrument.
Details the procedures for verifying the initial and ongoing performance of the Epoch instrument.
Details a test using a specialized plate to verify mechanical alignment, optical accuracy, and wavelength accuracy.
Describes tests using liquids to assess linearity, repeatability, and detect optical defects, complementing plate tests.
Provides specifications for accuracy, linearity, repeatability, and optical parameters of the Epoch instrument.
Lists general error codes, their descriptions, and probable causes for troubleshooting.
Details specific error codes related to assay definitions and their potential causes.
Describes fatal error conditions that prevent the instrument from functioning and require contacting support.
To Next Page
