Bittium Faros - Page 20

800953 Bittium Faros Manual
20 (80)
Version 7.0.0
© Bittium Biosignals Ltd 2023
Table 4 Device indications
Description
Indications
Device is connected to computer.
Green indicator is lit.
Battery is charging.
Blue indicator blinks.
Battery is fully charged.
Blue indicator is lit.
Unable to start measurement; error.
Red indicator is lit.
Measurement has started.
Green indicator is lit together with a start sound
♫
Measurement is running.
Green* indicator blinks every five seconds.
Measurement has ended.
Three ♫ ♫ ♫ beep-sound indications.
Pushbutton is pushed during measurement.
One ♫ beep-sound indication.
Battery is running low.
Blue indicator blinks twice and two ♫ ♫
beep-sound indications every five seconds.
Internal memory is almost full.
Orange indicator blinks twice and two ♫ ♫
beep-sound indications every five seconds.
Lead-off alarm (when lead-off detection is active)
Red indicator blinks twice and two ♫ ♫
beep-sound indications every five seconds.
Device is in Bluetooth idle state.
Green* indicator blinks every two seconds.
Firmware update.
Green indicator blinks during update.
Device reset.
All indicators blink once and one long ♫ beep-
sound indication.
Device has halted at internal error handling
checkpoint.
All indicators blink.
*Green heart indicator changes colour from green to blue in the following cases:
• Measurement is running and Bluetooth is connected.
• Device is in Bluetooth idle state and Bluetooth is connected.