Figure 2 Connecting Faros to computer using USB cable
4.5 Connection to computer
4.5.1 Connecting Faros to a computer
Use the USB cable delivered with your Faros device to connect the device to your personal computer.
1. Plug the USB cable to your computer.
2. Plug the other end to your Faros device. Blue light indicator starts to blink first, and then green light
indicator should start to blink also.
If green light indicator does not blink when device is connected to your computer, there may be a
connection issue. In this case, you should disconnect the USB cable connection and reconnect again, also
check carefully that the USB connection between the device and the cable and between the cable and your
computer is not loose.
4.5.2 Disconnect Faros from computer safely
Faros device must be safely disconnected from PC to avoid disk error. There are two methods for
disconnecting the device safely.
4.5.2.1 Using “Safely Remove Hardware and Eject Media” tool from Windows
To Next Page
Loading...