800953 Bittium Faros Manual
© Bittium Biosignals Ltd 2023
8 DATA REVIEW WITH EDF VIEWER
8.1 Measurement data review
Faros EDF data recordings can be reviewed using eMotion EDF Viewer. For installation instructions, see
chapter 5.
Open eMotion EDF Viewer from desktop icon or alternatively:
1. Connect your Faros device to computer using USB cable.
2. Browse to FAROS_DATA hard drive.
3. Open ‘Software’ folder.
4. Double click eMotion EDF Viewer folder and run ‘eMotionEDFViewer’.
To acquire software reviewing cardiac events from measurement data please contact us:
medical.support@bittium.com
It is recommended to install eMotion EDF Viewer to a computer before use. Software
installation package is located in Faros device internal memory Software – eMotion EDF
Viewer – Installer folder. Click ‘Setup’ icon and follow the installation instructions on screen.
It is recommended to move a large data file (<100 MB) to personal computer before
reviewing the data. If you are opening large data files directly from Faros device, it will take
several minutes to open.
To Next Page
Loading...
