User responsibility
This product shall be assembled, operated, maintained, and repaired in accordance with the instructions
provided.
A defective product should not be used. Parts that are broken, worn, missing, incomplete, distorted, or
contaminated should be replaced immediately. Should any repair or replacement become necessary, we
recommend that the device is delivered to your local distributor or Bittium Biosignals Ltd for service.
The user of the product is solely responsible for any malfunction resulting from improper use, faulty
maintenance, improper repair, damage, or alteration by anyone other than Bittium Biosignals Ltd or their
authorized service personnel.
Environmental conditions
Transport and storage conditions
OmegaSnap electrode must be transported and stored in conditions listed below.
• -20 °C to + 60 °C (transport)
• - 20 °C to + 60 °C at a relative humidity up to 90 %, non-condensing (storage)
o 1 month storage: -20 °C to +60 °C
o 3 months storage: -20 °C to +45 °C
o 12 months storage: -20 °C to +25 °C
• Occasional storage and transport: -40°C to+70°C
Continuous operating conditions
OmegaSnap electrode must be used in conditions listed below:
• A temperature range of + 0 °C to + 45 °C
• A relative humidity range of 15 % to 90 %, non-condensing
• An atmospheric pressure range of 700 hPa to 1 060 hPa.
To Next Page
Loading...