Bittium Faros - Holter Measurement Configuration

800953 Bittium Faros Manual
33 (80)
Version 7.0.0
© Bittium Biosignals Ltd 2023
Table 8 Electrode configurations
Number of ECG channels
Supported electrode configurations
1
2 electrodes, 3 electrodes, OmegaSnap, MiniSnap
2
3 electrodes, OmegaSnap-2ch (supported from firmware version 3.7.2)
3
5 electrodes, OmegaSnap-3ch
6.1 Holter measurement configuration
Holter measurements can be performed with every Faros model. The configuration for Holter measure-
ment is set using Faros Manager.
NOTE
Faros 180L requires using Faros Manager version 3.4.1 or later.
Figure 4 Holter configuration