Bittium Faros - Positioning of the Omegasnap Electrode; Positioning of the Minisnap Electrode

800953 Bittium Faros Manual
42 (80)
Version 7.0.0
© Bittium Biosignals Ltd 2023
7.1.1 Positioning of the OmegaSnap electrode
The recommended position for the OmegaSnap electrode is on the middle of the sternum as seen in the
pictures. Please refer to following User manuals for more information on how to use OmegaSnap elec-
trodes:
• 5800638 Bittium OmegaSnap 1-CH ECG Electrode Quick Guide
• 5800646 Bittium OmegaSnap 2-CH ECG Electrode Quick Guide
• 5800662 Bittium OmegaSnap 3-CH ECG Electrode Quick Guide
Table 9 OmegaSnap electrode positioning
OmegaSnap 1-CH ECG Electrode
OmegaSnap 2-CH ECG Electrode
OmegaSnap 3-CH ECG Electrode
NOTE
Optimal signal quality is obtained when the electrode is fully placed on top of the thorax
and the bottom of the electrode is clearly above the diaphragm.
7.1.2 Positioning of the MiniSnap electrode
The recommended position for the MiniSnap electrode is on the middle of the sternum as seen in the pic-
tures. Please refer to following User manual for more information on how to use MiniSnap Sensitive elec-
trode:
• 5800647 Bittium MiniSnap Sensitive 1-CH ECG Electrode Quick Guide