Operating instructions SC II Operation
61429850113 en-US 41 / 107
6.2 Switch off device
Press <On-Off> power key.
The device runs through a switch-off procedure.
The display goes dark after a short time.
6.3 Resetting the device
After switching on the scale the weight display ranges automatically at zero "0.000" kg pro-
vided that the scale is unloaded.
The scale has an automatic reset device, so that minor zero point changes are compensated
automatically.
Manual zerosetting
Menu setting
- Create key <Scale zerosetting>in configuration. Select 5 3 1 2.
The weight value display can (if the display is not set to zero) be reset again with the scale
unloaded.
Press key <Scale zero setting>.
The weight value display indicates "0.000" kg.
6.4 Correction options
6.4.1 Canceling function
A function called by mistake can be canceled. The device returns to the initial display.
Call up function "Unit price input".
Cancel function "Unit price input".
6.4.2 Deleting characters
Individual characters can be erased while values are being entered. This applies to the fol-
lowing values: PLU no., price, tare, number of pieces, quantity.
Entering a PLU no.
+
Delete character entered last.
6.5 SC II 100 K/B
With the SCII 100 K/B (K =POS terminal, B= Bakery), weight determination and linked func-
tions (taring, pricing with determined weight etc.) are not possible. The device runs automati-
cally on POS license. The operating processes and functional settings are mainly identical
with a scale. There are only differences in operating processes where weight value is used,
e.g. PLU with PLU type "Weighed".
To Next Page
Loading...
Need help?
General
