Bizerba SC II 100 - Operating procedure after PLU call-up

Operating instructions SC II Operation
61429850113 en-US 45 / 107
Operating procedure
Enter PLU no.
Illustration42: Entering PLU
PLU Prefix is displayed automatically
1
.
Automatic PLU prefix, e.g. 80
Enter PLU no., e.g. 123.
Illustration43: Entering PLU
The article is displayed once the PLU no.
has been entered
2
.
6.7 Operating procedure after PLU call-up
PLU call-up [}43].
6.7.1 PLU call-up and registration
Press a PLU key, e.g. <PLU1>.
Register using operator key, e.g. <OP1>.
6.7.2 Unit price input after PLU call-up
The <Unit price input> key has two functions. Unit price input after PLU call-up and unit price
input without PLU call-up [}47].
Menu setting
- In the "Prices" menu in data maintenance, selection: 112/ Dept. no./ PLU no./ 1: switch
on "price overwrite".
Place article on the scale.
Call up PLU article.
Press key <Unit price input> (depending on configuration).
Enter new unit price, e.g. 20, 30.
Register using operator key, e.g. <OP1>.