Bizerba SC II 100 User Manual

Operating instructions SC II Maintenance
61429850113 en-US 89 / 107
1
Tear-off edge
Illustration73: Tear-off edge
Cleaning thermal strip
Label printer or linerless printer.
The thermal strip must be cleaned on a regular basis and as soon as you notice that the
printing quality has decreased.
NOTICE
Coated thermal strip!
– The thermal strip is coated with a glass passivation layer and
must not be touched or cleaned with hard objects.
– Use Bizerba cleaning products to clean the thermal strip.
Open the side cover of the scale.
Open the printer lid by pulling it upwards.
Open the print head.
Clean the thermal strip
1
using the
Bizerba thermal print head cleaning pen
or dip a cleaning pad in Bizerba cleaning
solvent.
Afterwards, dry off using a dry cleaning
pad.
Illustration74: Print head
Clean label printer
Inspect label printer weekly and clean it from glue residue deposits on deflection roller, take-
up pin and paper deflector.

Bizerba SC II 100 Specifications

General

Brand	Bizerba
Model	SC II 100
Category	Scales
Language	English