BK Precision 2190D User Manual

91
 Turn the Universal knob to move through character selections.
When the desired character is highlighted, press the Universal
knob or press the “InputChar” option button to add it to the
specific position in the Name field.
 Additional selections for BackSpace, DeleteCharacter, and
CleanName are available for convenience and are also accessed
using the “Universal” knob in the same manner.
 Press the “Confirm” option button (when you have the Name
field completed as desired) to save the file onto the memory
device. After the “Confirm” option button is pressed, a “Data
Store Success!” messages briefly shown and the new folder or file
is shown on your USB flash drive.
Save/Recall Setup
Save Setups to Device:
The complete setup is stored in nonvolatile memory. When you recall the
setup, the oscilloscope will be in the mode from which the setup was
saved. The oscilloscope saves the current setup if you wait three seconds
after the last change before you power off the oscilloscope. The
oscilloscope recalls this setup the next time you apply power.
Table 3.43 – Save Setup to Device Menu
Option
Setting
Description
Type
Setups
Menu for the Storage/Recall setting
in the oscilloscope
Save to
Device
Save setup to the oscilloscope’s
internal memory.

BK Precision 2190D Specifications

General

Brand	BK Precision
Model	2190D
Category	Test Equipment
Language	English