51
3. Set up pulse width
Turn the “Universal” knob to set up width.
Video Trigger
Trigger on fields or lines of standard video signals.
Table 3.19 – Video Trigger Function Menu 1
When you select the video type,
put the couple set to the AC, then
you could trigger the NTSC,PAL
and SECAM video signal.
Select the input source to be the
trigger signal.
Ext and Ext/5 use the signal
applied to the EXT TRIG
connector as the source.
Normal triggers on the negative
edge of the sync pulse.
Inverted triggers on the positive
edge of the sync pulse.
All lines
Odd field
Even Field
Select appropriate video sync.
Enter the second page of
“Video trigger menu”.
Table 3.20 - Video Trigger Function Menu 2
When you select the video
type, put the couple set to the
To Next Page
Loading...
Need help?
General
