134
5 Remote Control
The 2190D series digital storage oscilloscope can be remotely controlled
by PC software application or user command programming.
The 2190D comes with EasyScopeX application software, which provides
most of the controls that emulate the front panel of the instrument. The
rear panel USB device port is used to connect to a computer to allow for
remote communication with the software. The EasyScopeX software is
free and can be downloaded at www.bkprecision.com.
Users can also control the oscilloscope by programming through standard
SCPI (Standard Commands for Programmable Instruments) commands.
Remote communication commands are supported via the USB device
interface and the RS232 interface. Refer to the programming manual,
available for download at www.bkprecision.com.
To Next Page
Loading...
