6
1.8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 77.877.2269
CHAPTER 1: SPECIFICATIONS
TABLE 1-1 (CONTINUED). SPECIFICATIONS
SPECIFICATION DESCRIPTION
Operation
Default IP Address
DTX1000-T, DTX1000SA-T, DTX1002-T: 192.168.1.22;
DTX1000-R, DTX1000SA-R, DTX1002-R, DTX1032-R: 192.168.1.21
Encryption Secure Sockets Layer (SSL) over TCP/IP, 128-bit between TX and RX, user set between RX and Hyper-V
Default Username admin
Default Password The password is blank by default
DDC Support Built-in/clone of remote
Power
Power Source External in-line power supply
Input Voltage 100–240 VAC, 50/60 Hz
Input Current 0.9 amps maximum
Power Consumption
Unit: 6.5 watts with keyboard and mouse attached;
Power supply is 20 W to support USB based powered devices
Heat Dissipation
(5 VDC x 4 amps) x 3.41 = 68.2 BTU/hour maximum
(Voltage x Nominal Current) x 3.41 = BTU/hr
Output Connector 2.5-mm barrel
Input Connector IEC-320, C8
Power Supply Cord Length 6 ft. (1.8 m)
Environmental
Operating Temperature 32 to 104° F (0 to 40° C)
Storage Temperature -4 to +140° F (-20 to 60° C)
Operating Humidity 5 to 95%, noncondensing
1.2 WHAT’S INCLUDED IN THE KITS
DTX1000-T-K includes:
(1) DTX1000-T
(1) DVI CPU Cable
(1) USB CPU Cable
DTX1003 includes:
(1) Single-head transmitter (DTX1000-T)
(1) InvisaPC Manager (DTX1032-R)
(2) Power supplies
(2) Power cords
(8) Rubber feet
DTX1002-T-K includes:
(1) DTX1002-T
(2) DVI CPU Cables
(1) USB CPU Cable
DTX1000 includes:
(1) DTX1000-T
(1) DTX1000-R
(2) Power supplies
(2) Power cords
(8) Rubber feet
NOTE: Does not include local CPU cables, order separately.
To Next Page
Loading...
