49
1.8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 77.877.2269
CHAPTER 12: OSD FUNCTIONS
Transmitter Diagnostics
The Transmitter provides diagnostics information for Black Box to debug customer encountered issues. When this button is
clicked the user is asked to save the diagnostics onto a memory stick in the Receiver unit. Send this file back to Black Box for
analysis.
12.7 MANAGING USERS
Users are defined in the InvisaPC system to provide rights to manage the system, rights to connect to different target devices and
set parameters for connections. There are three types of users that can be created in an InvisaPC system.
1. Administrator – users of the class have full rights to configure the system. They can create/modify/delete new users and
connections, change network settings, etc.
2. Power User – users of this class can modify resolutions for connections to virtual desktops and change his/her local password.
3. Standard Users – users of this class can only select from a list of pre-defined connections to access and view system
information. They cannot change any configuration settings.
The InvisaPC Receiver and Manager have one default user – admin, which is a member of the administrator group. This user is
defined by default and cannot be deleted. An InvisaPC Receiver or Manager can have a maximum of 32 users defined, unless in a
manager domain with an “upgrade” license installed. With the upgrade license installed up to 250 users can be defined.
To manage users, an administrator selects the Users tab (this Tab is only visible to Administrator class users).
admin
FIGURE 12-22. USER SCREENS
To Next Page
Loading...
