Blackmagicdesign Blackmagic MultiView 4 User Manual

Immediate Commands
@ X:0/destination,source
change route
@ X:0/destination,source/destination-2,source-2…
change multiple routes
The specified source ports are routed to the specified destinations.
Any routing changes will trigger
S:
notifications
@ X?0destination
request individual route status
The source routed to the specified destination will be returned as an
S:
notification.
@ S?0
request all ports route status
Each source and destination port pair will be returned as
S:
notifications
Salvo Commands
@ P:0/destination,source
queue route change
@ P:0/destination,source/destination-2,source-2…
queue multiple route changes
The specified routing changes are added to the current salvo for later execution.
@ P?0destination
request individual port status in salvo
If a routing change for the specified destination port is queued, the route will be returned as a
V:
notification.
@ V?0
request all ports status in salvo
Each queued routing change in the salvo is reported as a
V:
notification.
@ B:C
clear salvo
@ B:R
clear salvo
Any queued changes are discarded and the salvo is reset.
@ B:E
execute salvo
Any queued changes are executed and each routing change will be returned as an
S:
notification.
302302
Информация для разработчиков

Blackmagicdesign Blackmagic MultiView 4 Specifications

General

Brand	Blackmagicdesign
Model	Blackmagic MultiView 4
Category	Signal Processors
Language	English