Blackmagicdesign Cinema Camera 6K - Page 80

Saving and loading presets
To create a new preset, tap the ‘add’ icon. This brings up a touch keyboard on your LCD where
you can name your preset. Enter a name and tap ‘update’ to save all of your current settings to
that preset.
If your camera already has a preset loaded with the same name, you can choose to overwrite
the existing preset or keep both.
Once you have a preset saved, tap its name in the preset menu to select it. To load a preset,
tapthe ‘load’ icon.
You can update a preset by tapping the ‘update’ icon. This will bring up a prompt asking you
if you want to update the preset with your Blackmagic Cinema Camera 6K’s current setting.
Tap ‘update’ to confirm.
Select a preset and tap the ‘load’ icon to load it. Selected presets will appear solid
blue, while currently loaded presets have a blue line on the left of their icon.
To change the name of a preset, tap the ‘edit’ icon and enter a new name using the keypad.
Tap ‘update’ to confirm.
Importing presets
To import a preset, tap the ‘manage’ icon at the bottom of the ‘presets’ menu. Tap ‘import
presets’, then tap ‘import’ to confirm. This brings up the presets import screen. If your
preferred preset is not on the active card or drive, switch between recording media by tapping
a media button at the top of the touchscreen. You can import presets from a USB-C flash
disk or CFexpress card.
Your camera searches the root directory and ‘Presets’ folder on your selected media, and lists
available presets. Any presets you have saved elsewhere are not visible.
80Settings