Transferring Files over a Network
Blackmagic Cinema Camera 6K is able to transfer files using the following protocols:
HTTP
Hypertext transfer protocol.
HTTPS
Hypertext transfer protocol secure.
FTP
File transfer protocol.
SMB
Server message block.
These protocol options let you copy files directly from your camera’s CFexpress card media to
your computer via a network with the fast speeds a local network can provide. For example,
you can copy clips and start editing them as soon as you have finished recording.
Access to your Blackmagic Cinema Camera 6K via any of these protocols can be enabled or
disabled via the Camera Setup utility. For example, you could disable FTP access and enable
HTTPS access at the same time.
Connecting to your Cinema Camera 6K via HTTPS
To access your camera via the web media manager you will need the URL available via the
network access settings.
1 Using a USB-C cable, connect your computer to your camera via the USB port on the side
panel and open Camera Setup. You should see a USB connection icon next to the unit
name. Click on the circular icon or anywhere on the product image to open the settings.
2 When using a self signed certificate, navigate to the network access settings and click on
the copy icon beside the URL. This URL is based on the name of your camera. To modify
the URL, modify the name of the unit.
When using a self signed certificate, click on the link
3 If you have imported a certificate signed by a CA or IT department, copy and paste the
address in the domain field for the current certificate.
135Transferring Files over a Network
To Next Page
Loading...
