Copy the domain address and paste into a browser
4 Open your web browser and paste the address into a new window. If you have enabled
access with security only you will be prompted to enter the username and password set in
Camera Setup.
When using a self signed certificate, a browser warning will appear regarding the
privacy of the connection. This means a trusted signed certificate has not been imported
via the Camera Setup utility
To continue without a valid and trusted certificate, follow your browser prompts to acknowledge
the risks and proceed to the website.
Transferring Files Using Web Media Manager
When you first open the web media browser view you will see a folder that contains your clips.
Double click the folder to reveal the contents.
Click the download button to download files or the trash icon to delete them
To download files, use the arrow icon on the far right. Your browser may prompt you to allow
downloads from the site. Click on ‘allow’. To delete a file, click the trash can icon and a delete
file window will appear. Click ‘delete’ to proceed.
Transferring Files via FTP
With your computer and camera on the same network, all you need is an ftpclient and your
camera’s IP address or the FTP URL in the Camera Setup utility.
1 Download and install an FTP client on the computer you want to connect your camera
to. Werecommend Cyberduck, FileZilla or Transmit but most FTPapplications will work.
Cyberduck and FileZilla are free downloads.
136Transferring Files over a Network
To Next Page
Loading...
