Settings
Dashboard
Press the ‘menu’ button to open your camera’s dashboard. This tabbed menu has settings not
available from the touchscreen. Settings are divided by function into ‘record’, ‘monitor,’ ‘audio,’
‘setup,’ ‘presets,’ and ‘LUTS’ tabs. Each tab has multiple pages, which you can cycle through by
tapping the arrows at the edge of your camera’s touchscreen, or swiping left or right.
Tap the ‘record,’ ‘monitor,’ ‘audio,’ ‘setup,’ ‘presets,’ and ‘LUTS’ headings to move
between your Cinema Camera 6K’s dashboard tabs
Record Settings
The ‘record’ tab lets you set your video format, codec, and resolution, as well as other settings
that are important for your recorded video, such as dynamic range and detail sharpening.
Record Settings 1
The first page of the ‘record’ settings tab contains the following settings.
52Settings
To Next Page
Loading...
