EasyManuals Logo

Blodgett COS-6 User Manual

Blodgett COS-6
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Maintenance
22
Cleaning and Preventive Maintenance
CLEANING THE INTERIOR
Dailycleaning oftheappliance isessentialforsan-
itation and to ensure against operational difficul-
ties. Use an oven cleaning detergent in conjunc-
tion w ith the supplied spray bottle.
On stainless interiors, deposits of baked on splat-
ter, oil, grease or light discoloration may be re-
moved with a good non toxic industrial stainless
steelcleaner. Apply cleanerswhen the unit is cold
and always rub with the grain of the metal. The
racks,racksupportsandtheblowerwheelmaybe
cleaned either in the unit or removed and s oaked
in a solution of ammonia and water.
NOTE: DO NOT use corrosive cleaners!
1. Cool the appliance down to 140_F(60_C) or,
ifthe unit has been idle, t urn the steam mode
onfor3to4minutesinordertowarmtheinteri-
or surfaces.
2. Fillthespraybottleandpumpairintothecon-
tainer with the pressure pump.
3. Spraytheinterioroftheunitwithacleaningso-
lution.
NOTE: Never spray water into the unit when
the temperature is above 212_F.
NOTE: NEVER SPRAY WATER IN THE UNIT
AFTERUSINGTHE HOTAIRORCOM-
BI MODES.
4. Letthe cleaner work for10to20 minuteswith
theunitoff.Fordifficultcleaningallowtowork
over night.
5. Set the timer for 15 to 20 minutes. Turn the
mode selector switch to Steam. This willsoft-
en all burned on residue.
6. Rinsethe interior withthe hoseand spray as-
sembly.
7. Setthemodeselectortosteamforanotherfive
minutestoflushouttheinteriorand removeall
detergent residue.
NOTE: The interior cavity should never be
scoured or scraped.
CLEANING THE EXTERIOR
Exteriors maybe cleaned and kept in good condi-
tion w ith a stainless steel polish.
NOTE: DONOTspraytheoutsideoftheappliance
with water.
PREVENTIVE MAINTENANCE
The best preventive maintenance measures are:
D
the proper initial installation of the equipment
D
deliming the steam generator (if applicable)
D
a program for routine cleaning.
These units requires no lubrication. Contact the
factory, afactoryrepresentative ora localBlodgett
Combi service company to perform maintenance
and repairs should they be required.
WARNING!!
Disconnect the appliance from the power
supply before servicing or cleaning.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blodgett COS-6 and is the answer not in the manual?

Blodgett COS-6 Specifications

General IconGeneral
BrandBlodgett
ModelCOS-6
CategoryOven
LanguageEnglish

Related product manuals