• DRIVE SHAFTS
Type
Make
and
type ofjoint
GENERAL
DATA-continued
Solid shaft, reverse spline.
Hardy Spicer, hemispherical joint.
Rack and pinion.
21·
15!
in. (40 cm.).
~:
positive
to
3°
POSitive.]
9°
30' with vehicle
in
an
nin. (1'6 mm.) unladen condition.
23°
•
•
STEERING
Type
Steering-wheel
turns-lock
to lock
Steering-wheel diameter
..
Camber angle
Castor angle
King pin (swivel hub) inclination
Toe-out
Lock angle: outer wheel
at
20°, inner wheel
FRONT
SUSPENSION
Early models,
1959-1964
Front
Rear
Later models
Front
Rear
- Fluid capacity
Fluid pressure: Early models (unladen)
Later models (unladen)
(Car Nos. given in Section H.lO)
REAR SUSPENSION
Type
Toe-in
Camber
Radius
arm
bushes (reamed bore)
HYDRAULIC DAMPERS (Rubber suspension only)
Type:
Front
and rear
BRAKES
Lockheed hydraulic
Drum
size
Lining dimensions:
Front
or rear
Lining area:
Front
or
rear
Lining material
Lockheed hydraulic
Lining dimensions
Lining area total
Lining material
Type: ventilated disc
MINI. Issue 2.
14091
Rubber cone spring.
Levers
of
unequal length.
Trailing radius arms.
Hydrolastic displacers.
Levers
of
unequal length.
Trailing arms.
4 pints
(5
D.S. pints, 2·27 litres).
263 Ib.jsq. in. (18'49 kg.jcm.
2
).
282 lb.jsq. in. (19,74 kg.jcm.
2
).
Rubber cone spring.
i in. (3,18 mm.).
1
° positive. .
·8125
to
·8130 in. (20,63
to
20·65 mm.).
/Tubular telescopic.
Single-leading shoe.
7 in. (17,8 cm.) diameter.
6·75 in. X 1·25 in. (17'14 cm. X 3·17 cm.).
33·75 sq. in. (217·7 cm.
2
).
Don
202.
Two-leading-shoe.
6·75 X 1·5 in.
(17'4x3'18
cm.).
40·5 sq. in. (261·29 cm.
2
).
Don
202.
,,3·50Bx
10.
"f
fj
mk1-performance-conversions.co.uk
To Next Page
Loading...
