SAM 950 Berkeley Nucleonics Corporation 15 of 62
CHAPTER 4. PDA APPLICATION SOFTWARE
INTRODUCTION
The built-in PDA communicates with the SAM 950 unit through wired USB network protocol. Its main
function is to provide dose (and count) rate data for the gamma-ray. In addition it provides the operator with
a convenient graphic status display and access to the analytical tools. It also manages the configuration and
calibration of the paired SAM 950 unit.
The SW is Android (Google) OS based and compatible with any Android based PDA or Smart Phone. The
standard unit imbedded with the SAM 950 is the Samsung Galaxy J5 or equivalent. In addition to touch
screen in handling the imbedded smartphone, it can be also controlled by hardware button keys on the handle
of the SAM 950 unit.
Figure 4.1. Main screen
To Next Page
Loading...