SAM 950 Berkeley Nucleonics Corporation 39 of 62
Administrator login requires password. Regular user can’t access to certain information and/or setup.
Factory setup default password for administrator is ‘1234’. To change the password, refer to the
figure 5.2. It is in ‘Device Information/Password’ in Setup menu.
STEP 3. AGENT AND SEARCH PLACE INFORMATION
Note: the SAM III PeakAbout software will not start if setup has not been completed.
1. Setup menu can be access by press menu button( ) on the handle or Touch ( )icon on the
touch screen
2. Select a ‘Setup’.
3. Type in information on the “User Name” and “Search Location” fields
Figure 5.3. Example of access to setup menu
To Next Page
Loading...