Appliance description
EN
www.bora.com 19
After 10 minutes, the power setting automatically reverts to
230°C.
PKFI3, PKI3, PKIW3, PKG3, PKC3, PKCB3, PKCH3:
heat retention level Switch off after hours:minutes
1 ( )
8:00
2 ( )
8:00
3 ( )
8:00
80–140°C (PKT) 8:00
Tab.3.14
Safety shut-down on the different heat retention levels
3.5.3
Residual heat indicator
If a cooking or grilling zone is still hot after switching off, there is a
risk of burns or fire. While is displayed (residual heat indicator), do
not touch the cooking or grilling zone or place any heat-sensitive
objects on top of it. After a sufficient cooling period the indicator will
go out.
Cooktops Tepan stainless steel
grill
Limit temperature < 60°C < 50 °C
Tab.3.15
Residual heat indicator limit temperatures
3.5.4
Overheating protection
The appliance is fitted with overheating protection. The overheating
protection can be triggered if:
T
cookware is heated up empty;
T
oil or fat is heated on high power;
T
a hot cooking zone is switched on again after a power cut.
Whilst the overheating protection is active, one of the following steps
is taken:
T
the activated power setting is switched back to the previous level;
T
the power setting can no longer be switched on;
T
the set power level is reduced;
T
the cooktop switches off completely.
After a sufficient cooling period, the cooktop can be used again in
full.
3.5.5
Child lock
The child lock prevents the appliance from being switched on
accidentally.
u
is displayed.
If a single cooktop is operated without a cooktop extractor,
removal of the knob ring can prevent the appliance from
being switched on accidentally or without permission.
To Next Page
Loading...
Need help?
General