Functions and operation
EN
www.bora.com 21
5
Functions and
operation
u
Observe all safety and warning information (see"2Safety").
5.1
Knob operation
5.1.1
Operating the knob ring
The ring on the control knob can be turned both clockwise and
anticlockwise. It can be turned as far as you wish; there is no defined
0 position.
Turn it clockwise (to the right) to:
T
Switching on
T
increase power level/value
T
navigate the menu
Turn it anticlockwise (to the left) to:
T
Switching off
T
decrease power level/value
T
navigate the menu
Fig.5.1
Operating the knob ring
5.1.2
Operating the touch surface
The touch surface of the control knob reacts to different touch
commands:
Command Contact Time
Tap brief touch < 1s
Double tap 2 brief taps one after the other
Long press keep finger in place longer 2–4 s
Extra-long press keep finger in place longer 5–8 s
Tab.5.1
Operating the touch surface
Fig.5.2
Diagram of the touch commands
[1]
Tap command diagram
[2]
Long press diagram
[3]
Extra-long press diagram
Use tap commands to:
T
Calling up the function menu
T
confirm menu items/times/functions
Use double-tap commands to:
T
Pause function
Use long-press commands to:
T
Deactivating the childproofing feature
T
Exiting the additional function menu and configuration menu
Use extra-long-press commands to:
T
reset the filter service life
T
Accessing the configuration menu
5.2
Switching the system on and
off
5.2.1
Switching on
u
Turn a knob ring of your choice clockwise
T
The system is activated.
T
is displayed on all displayed.
Fig.5.3
Switching on the system
Fig.5.4
Standard display after switching on
If L is displayed on all control knobs when the appliance is
switched on, the child lock is active. The appliance cannot be
operated until this is deactivated.
5.2.2
Switching off
u
Turn the knob ring anticlockwise to power level 0.
T
Any active additional functions will be deactivated and the
appliance will be switched off.
Fig.5.5
Switching the appliances off
T
If all connected appliances are switched off (= power level 0), the
whole system is automatically switched off after 10 seconds.