EasyManuals Logo

bora Professional 3.0 User Manual

bora Professional 3.0
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Functions and operation
EN
26 www.bora.com
Fig.5.19
Permanently deactivating the child lock
5.4.5
Filter service life and filter service
display
The maximum service life of the recirculation filter is defined by the
filter type configured in the system (filter service life). Depending on
the type of filter fitted, the filter service display will be activated after
300 or 600 operating hours. If an ‘F’ (filter service display) appears
on the control knob display after switching on the cooktop extractor,
the recirculation filter’s service life has come to an end and the filter
needs to be replaced (filter change).
T
The filter service display is shown every time the cooktop extractor
is switched on and remains active until the filter has been changed
and the filter service display has been reset.
T
The cooktop extractor can still be operated without limitations.
T
To use the cooktop extractor, the filter service display can be
deactivated once with a tap or permanently reset.
If the service life of the activated charcoal filter is exceeded,
the correct functioning of the system may be affected. It is
still possible to use the cooktop extractor, however, the
warranty and guarantee claims shall then be invalid. The
components of the grease filter require regular cleaning
regardless of the filter service display.
Displaying the remaining filter service life
Fig.5.20
Displaying the remaining filter service life
T
The remaining filter service life is shown in hours in the control
knob display (e.g. 100 hours).
Resetting the filter service life early
Fig.5.21
Resetting the filter service life early
Deactivating the filter service display for a cooking
session
The recirculation filter’s service life has come to an end. appears on
the cooktop extractor’s control knob displayed.
Fig.5.22
Deactivating the filter service display for a cooking session
T
The cooktop extractor can be used for a cooking session.
T
is shown in the control knob displayed.
Resetting the filter service display
When the recirculation filter is replaced, the filter service display must
be reset.

Table of Contents

Other manuals for bora Professional 3.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the bora Professional 3.0 and is the answer not in the manual?

bora Professional 3.0 Specifications

General IconGeneral
Product namebora Professional 3.0
Product categoryHob
Frequency50/60 Hz
Power control levels9
Number of cooking zones4
Type of cooking zonesInduction
Boost functionYes
Residual heat indicatorYes
Child safety lockYes
TimerYes
Power managementYes
Dimensions (W x D x H)370 x 540 x 199 mm
Weight12 kg
Material surfaceGlass-ceramic
Voltage220-240 V