Functions and operation
EN
www.bora.com 31
Activating additional rings (2-ring/3-ring additional
switching)
Fig.5.30
Activating additional rings
T
The second or third ring is activated in the chosen cooking zone.
T
The cooking session is continued at the set power level with two or
three active rings.
T
The number of active rings is shown in the control knob display
next to the power level (e.g. or , or ).
Deactivating additional rings
u
Repeat the above steps, but select fewer active rings in the
function menu.
T
The cooking session is continued at the set power level with the
selected number of rings.
5.6.3
Variable heat retention function
Depending on the application or food used, it is possible to choose
from 3 heat retention levels at different temperatures:
heat retention level Symbol Temperature
1 (melting) ≈ 42°C
2 (keeping warm) ≈ 74°C
3 (simmering) ≈ 94°C
Tab.5.9
Heat retention levels
T
The maximum duration of the heat retention function is limited to 8
hours.
In practice the temperatures of the heat retention levels may
vary slightly as they are influenced by the cookware, the
amount of food and the different heating technologies. The
temperatures can also vary due to the influence of the
cooktop extractor.
Activating the heat retention function on induction
cooktops
Fig.5.31
Activating the heat retention function on induction cooktops
T
An acoustic signal is heard.
T
The selected heat retention level is activated.
T
is shown in the control knob / / displayed.
Activating the heat retention function on Hyper and
HiLight cooktops
Fig.5.32
Activating the heat retention function on radiant bodies
T
An acoustic signal is heard.
T
The selected heat retention level is activated.
T
is shown in the control knob / / displayed.
To Next Page
Loading...
Need help?
General