Bosch APC-AMC2-4R4CF - 7 Troubleshooting; Common Problems and Solutions

Access Modular Controller 2 Installing | en 39
Bosch Access Systems V.B. Installation manual 2020-01 | V02 |
4.4 Closing the Case
Before aligning the covers, unplug any pluggable screw connectors. Insert the hooks on the
lower edge of the front cover into the lugs on lower edge of the plastic back cover [1]. Please
ensure that the BOSCH logo is not upside-down. The upper edge of the front cover now aligns
with the two-point snap-in closures on the upper edge of the back cover [2], and may thus be
clicked gently into place.
Hence the closing process is the reverse of the opening process.
1
2
Figure4.11: Closing the case
Figure4.12: Closing the case